How to Replace 2008 to 2013 Nissan Rogue Rear Bumper

Here is how to replace your 2008 to 2015 Nissan Rogue rear bumper cover. This tutorial covers removal and installation. The process is not as difficult as you may think.

To replace your 2008 to 2015 Nissan Rogue rear bumper cover, you'll need:

  • New Nissan Rogue rear bumper cover

  • Flat-head screwdriver

  • Socket wrench set

Follow these steps to replace your Nissan Rogue rear bumper:

1. Start with the wheel wells. Using a 10mm socket wrench, remove the bolt that is found between the bumper and the frame of the vehicle.

2. At the bottom of the bumper near the tire, remove another bolt. Do steps 1 and 2 on the other side of the vehicle.

3. Remove the plastic push pins found under the bumper. There are 5 spread across from end to end.

4. Open the tailgate and remove the bolts securing the bumper found on both sides.

5. Safely remove the bumper starting from one end. The bumper should fall off easily.

6. Snap your new bumper on.

7. Replace the bolts (removed in step 4) to secure the bumper.

8. Make sure that both ends of the bumper are snapped properly.

9. Put back the bolts found in between the bumper and the frame of the vehicle (removed in step 1).

10. Put back the bolts at the bottom of the bumper on each side (removed in step 2).

11. Put back the push pins under the bumper. There should be 5 (removed in step 3).

12. Check and tighten the bolts.

There you have it: the steps to replace your Nissan Rogue rear bumper. 

 

About ReveMoto

Locally owned and operated since 2012, ReveMoto has been sourcing, painting and shipping parts across the U.S. for car newbies & DIYers to professional automotive shops & enthusiasts. No matter where you are, we're here to help.