2021-2023 Ford F-150 XLT Chrome Delete & Painted-to-Match Front-End Conversion | Ready to Install

Give your 2021–2023 Ford F-150 XLT a more modern, aggressive appearance without changing the identity of your truck. This ReveMoto F-150 XLT Chrome Delete Conversion replaces the factory chrome-heavy front-end appearance with a vehicle-color painted-to-match front bumper combined with a Carbon Black grille and black front-end trim components.

Built using genuine Ford OEM components, each conversion is configured around your truck's factory equipment, including front parking aid, Auto Park, fog-lamp configuration, engine-heater configuration, and other bumper-related options.

ReveMoto professionally prepares and paints the replacement front bumper to match your vehicle's current color, using advanced color-matching techniques that account for fading and sun exposure.

Painted to Match. Ready to Install. Built around your F-150's configuration.

This conversion is built using genuine Ford OEM replacement components selected for the 2021–2023 Ford F-150 and matched to your vehicle's factory configuration.

Because Ford offered multiple front bumper configurations during these model years, the specific OEM bumper and supporting components can vary according to factory equipment.

ReveMoto verifies the appropriate configuration before fulfillment and professionally paints the applicable replacement bumper to match your vehicle's current color.

The 2021–2023 Ford F-150 was offered with multiple front-end configurations. The exact components required can vary depending on factory equipment.

Your conversion may require configuration-specific consideration for:

• Front parking sensors
• Auto Park
• Fog lamps
• Front camera
• Tow hooks
• Active grille/lower shutters
• Engine heater
• Bumper and lower-trim configuration
• Other factory-installed equipment

VIN verification is required before fulfillment to confirm the correct bumper and supporting components for your F-150.

This helps prevent ordering an incompatible bumper configuration and allows ReveMoto to build the conversion around your truck's actual factory equipment.

For clarity, ReveMoto's finish strategy for this conversion is:

Painted to Match

• Front bumper

Chrome Delete / Black Finish

• Carbon Black grille
• Black lower molding
• Black bumper opening/hole covers
• Applicable black center-cover/trim components

The finished appearance is designed around a body-color painted bumper + blacked-out front end.

Depending on your F-150's factory equipment, certain components may be transferred from the original front end rather than replaced.

These can include:

• Ford grille emblem
• Front parking sensors
• Front camera
• Fog lamps
• Fog-lamp wiring
• Active grille/lower-shutter components
• Applicable brackets
• Reusable factory mounting hardware

Transfer requirements are confirmed during the VIN/configuration verification process.

This is a bolt-on exterior conversion using genuine Ford OEM replacement components, but installation should be performed by a qualified automotive technician or experienced installer.

Installation may involve:

• Removing the factory front bumper
• Transferring reusable factory mounting hardware
• Transferring parking sensors where equipped
• Transferring the front camera where equipped
• Transferring fog lamps and wiring where equipped
• Transferring grille/shutter components where applicable
• Installing the replacement grille and trim
• Installing the replacement bumper
• Reconnecting factory electrical components
• Checking sensor and camera operation after installation

A separate hardware kit is generally not required when the original factory hardware is clean, undamaged, and reusable.

Any damaged or missing clips, retainers, bolts, nuts, brackets, or other fasteners should be replaced during installation.

Vehicles equipped with parking sensors, cameras, or other driver-assistance systems may require appropriate calibration or system verification after installation.

• For 2021–2023 Ford F-150 XLT models.
• VIN verification is required before fulfillment.
• Front bumper configuration varies according to factory equipment.
• Front Park Aid and Auto Park require different bumper configurations.
• Fog-lamp-equipped and non-fog-lamp configurations require different bumper-opening components.
• Engine-heater configuration may affect center-cover selection.
• Existing sensors, cameras, lamps, shutters, brackets, and hardware may be transferred depending on configuration.
• Original factory mounting hardware should be reused when it is clean, undamaged, and compatible.
• Damaged or missing hardware should be replaced during installation.
• This product is a chrome-delete/front-end appearance conversion, not a complete F-150 XLT-to-STX conversion.
• Professional installation is recommended.

Frequently Asked Questions

Q: What is the 2021–2023 Ford F-150 XLT Chrome Delete Conversion?

A: The 2021–2023 Ford F-150 XLT Chrome Delete Conversion replaces the chrome-heavy portions of the factory XLT front end with a professionally painted-to-match front bumper and black Ford OEM front-end components.

The result is a cleaner, sportier body-color and black front-end appearance while retaining the original F-150 XLT platform.

Q: Is this a complete F-150 XLT-to-STX conversion?

A: No. This is a chrome-delete and front-end appearance conversion, not a complete XLT-to-STX trim conversion.

The conversion focuses on replacing the applicable front bumper, grille, lower molding, bumper opening covers, and center-cover components to create the desired blacked-out appearance.

Q: Which part of the conversion is painted to match?

A: The front bumper is the primary painted-to-match component.

ReveMoto professionally paints the replacement bumper to match your vehicle's current color using advanced color-matching techniques that account for fading and sun exposure.

The grille, lower molding, bumper opening covers, and applicable center-cover components remain in their intended black/chrome-delete finish.

Q: Are the parts genuine Ford OEM parts?

A: Yes. The major replacement components for this conversion are genuine Ford OEM components, selected according to the configuration of your 2021–2023 F-150.

The exact bumper and supporting components can vary depending on factory equipment, which is why VIN verification is required before fulfillment.

Q: Do I need a different bumper if my F-150 has Front Park Aid?

A: Yes. The 2021–2023 F-150 uses different front bumper configurations depending on whether the truck has Front Park Aid and whether it is equipped with Auto Park.

ReveMoto supports the applicable configurations, including:

• Without Front Park Aid
• With Front Park Aid + With Auto Park
• With Front Park Aid + Without Auto Park

Your VIN is used to determine the appropriate bumper configuration.

Q: Does the conversion work with an F-150 that does not have Front Park Aid?

A: Yes. A specific OEM bumper configuration is available for F-150s without Front Park Aid.

Because Ford used multiple bumper configurations, ReveMoto verifies the vehicle before fulfillment rather than assuming all 2021–2023 F-150 XLTs use the same bumper.

Q: Does the conversion include fog lamps?

A: The bumper-opening components are configuration-specific. F-150s with and without fog-lamp equipment can require different components.

If your truck has factory fog lamps, ReveMoto will verify the appropriate configuration through the VIN verification process before fulfillment.

Q: Does the conversion include parking sensors?

A: The conversion is built around the truck's factory configuration. Existing factory parking sensors and related components may be transferred from the original bumper where applicable.

The correct bumper configuration is selected based on your vehicle's factory equipment.

Q: Do I need to buy new bolts and hardware?

A: A separate complete bolt and hardware kit is generally not required.

Reusable factory mounting hardware—including applicable bolts, nuts, brackets, clips, and retainers—can typically be transferred from the original front end when it is clean, undamaged, and compatible.

Any damaged, missing, or non-reusable hardware should be replaced during installation.

Q: What happens to my original grille emblem, sensors, camera, and other components?

Depending on your F-150's factory configuration, certain original components may need to be transferred to the new replacement components, such as:

• Ford grille emblem
• Front parking sensors
• Front camera
• Fog lamps
• Fog-lamp wiring
• Active grille/lower-shutter components
• Applicable brackets
• Factory mounting hardware, when reusable

Your original chrome grille, bumper, trim, and other removed components remain your property. We recommend keeping your original parts after the conversion in case you ever want to return the vehicle to its original appearance or need replacement components in the future.

Any component that ReveMoto paints as part of the conversion will be a brand-new replacement part. 

Q: Will the painted bumper match my existing F-150 paint?

A: ReveMoto professionally paints the replacement bumper to match your vehicle's current color.

Our process uses advanced color-matching techniques and accounts for fading and sun exposure, which is particularly important on vehicles that have been exposed to the elements for several years.

Q: Do I need to provide my VIN?

A: Yes. VIN verification is required before fulfillment.

The 2021–2023 Ford F-150 was offered with multiple bumper, parking-aid, Auto Park, lighting, camera, shutter, and trim configurations. Your VIN allows ReveMoto to verify the appropriate components for your truck.

Q: Is this conversion bolt-on?

A: The conversion uses replacement exterior components designed around the factory F-150 front-end mounting points.

Installation involves removing the original components and installing the replacement components. Depending on the vehicle's equipment, factory sensors, camera, lamps, wiring, brackets, shutters, and hardware may need to be transferred.

Professional installation is recommended.

Q: Will my parking sensors and camera still work after the conversion?

A: The conversion is designed around the truck's existing factory equipment, but sensors and cameras must be properly transferred and connected during installation.

Vehicles equipped with parking sensors, cameras, or other driver-assistance systems may require system verification or calibration after installation.

Q: What model years does this F-150 Chrome Delete Conversion fit?

A: This conversion is designed for 2021–2023 Ford F-150 XLT models, subject to factory equipment and configuration.

Because there are multiple bumper configurations, VIN verification is required before fulfillment.

Q: Does the conversion change my F-150's trim level?

A: No. This is an appearance conversion. It does not change the vehicle's factory trim designation or make an XLT an STX.

It gives the XLT a black-and-body-color front-end appearance similar to the styling customers may associate with more sport-oriented F-150 configurations.

Q: Why does ReveMoto require VIN verification?

A: VIN verification helps determine which front bumper and supporting components are appropriate for your specific F-150.

Important differences can include:

• Front Park Aid
• Auto Park
• Fog-lamp configuration
• Front camera
• Engine heater
• Active grille/lower shutters
• Other factory-installed equipment

This configuration-based approach helps reduce fitment problems and prevents customers from receiving an incompatible bumper.

Q: Are the black components painted to match my truck?

A: No. The grille, lower molding, bumper opening covers, and applicable center-cover components are intended to remain black.

The conversion's finish strategy is:

Painted to Match: Front bumper

Black / Chrome Delete: Grille, lower molding, bumper opening covers, and applicable center-cover components.

Q: Does this conversion remove all chrome from my F-150?

A: The conversion is designed to delete the chrome appearance from the applicable front-end components included in the kit.

It does not necessarily remove every chrome element elsewhere on the truck. Depending on the vehicle, other exterior chrome components—such as door trim, badges, or other body-side pieces—may remain.

Q: Is professional installation recommended?

A: Yes. Professional installation is recommended, particularly for F-150s equipped with Front Park Aid, Auto Park, front cameras, fog lamps, or other driver-assistance equipment.

A qualified installer can properly transfer the required components, reconnect factory systems, and verify their operation after installation.

Your replacement bumper is professionally prepared and painted to match your vehicle's current color using advanced color-matching techniques designed to account for fading and sun exposure.

ReveMoto's goal is not simply to apply a generic color formula. The objective is to create a finished component that visually integrates with the existing exterior of your truck.